Global Contract Professionals
Providing the world’s top engineering and design firms with experienced,
qualified engineers.
To be considered for one (or more) of these opportunities, submit your resume to GCPJobs@teamglobal.com, or contact a Global Recruiter at one of the numbers below.
Current Engineering & Design Opportunities
Below is a list of current Aerospace Design and Engineering openings. Positions listed in red are HOT!
To learn about rate increases, length of contract increases, and other changes, contact your Global recruiter today!
| Position Title | Location | Additional Information | |
| Engineering | Assembler - Light Industrial | Alabama - Decatur | 6 months |
| Engineering | Welder | Alabama - Decatur | 4 months |
| Engineering | HR Leader | Arkansas - Little Rock | |
| Engineering | Manufacturing Development Engineer | Arkansas - Searcy | 5 months |
| Engineering | Admin Assistant 1 | California - Costa Mesa | 6 Months |
| Engineering | Buyer Assistant | California - Costa Mesa | |
| Engineering | Technician | California - Costa Mesa | |
| Engineering | Program Manager | California - Costa Mesa | |
| Engineering | Project Manager | California - Costa Mesa | |
| Engineering | Quality Assurance - Engineering 3 | California - Hawthorne | |
| Engineering | Assembler - Light Industrial | California - Hayward | |
| Engineering | Administrative Support | California - Livermore | |
| Engineering | Assembler | California - Mira Loma | |
| Engineering | Electrical Engineer | California - San Diego | 6 months |
| Engineering | Masker | California - Torrance | |
| Engineering | Assembler - Light Industrial | Connecticut - Bethel | |
| Engineering | Accountant | Florida - Sarasota | |
| Engineering | Assembler - Light Industrial | Florida - Sarasota | |
| Engineering | Inspector - Quality Control | Florida - Sarasota | |
| Engineering | Manufacturing Engineer | Florida - Stuart | |
| Engineering | Toolmaker, Senior Level | Florida - Stuart | |
| Engineering | Technical Trainer | Georgia - Marietta | 1 year |
| Engineering | Systems Engineer | Georgia - Marietta | 8 months |
| Engineering | Manufacturing Engineer | Georgia - Marietta | |
| Engineering | Programming Numerical Control 3 | Georgia - Midgeville | |
| Engineering | Electrical Component Install Engineer | Georgia - Savannah | |
| Engineering | Electrical Harness Install Appl Engineer | Georgia - Savannah | |
| Engineering | Stress Analyst | Georgia - Savannah | |
| Engineering | Programmer / Software Engineer II | Georgia - Savannah | |
| Engineering | Senior - Technical Writer | Georgia - Savannah | |
| Engineering | Propulsion Engineer | Georgia - Savannah | |
| Engineering | Certification Project Specialist II | Georgia - Savannah | |
| Engineering | Loads & Dynamics Engineer | Georgia - Savannah | |
| Engineering | Flight Dynamics / S&C Engineer | Georgia - Savannah | |
| Engineering | Mat & Proc Engr / Metallic Material | Georgia - Savannah | |
| Engineering | Flight Controls Engineer | Georgia - Savannah | |
| Engineering | Aerospace Engineering Recruiter II | Georgia - Savannah | |
| Engineering | Flight Test Aero/Performance Engr | Georgia - Savannah | |
| Engineering | Landing Gear & Door Engineer | Georgia - Savannah | |
| Engineering | Electronic Systems Engineer | Georgia - Savannah | |
| Engineering | Flight Test Avionics Engr | Georgia - Savannah | |
| Engineering | Flight Test Instrumentation Engineer | Georgia - Savannah | |
| Engineering | Loads Engineer | Georgia - Warner Robbins | |
| Engineering | Visual & Pack Inspector | Iowa - Belmond | |
| Engineering | Machine Operator - Heavy Industrial | Iowa - Belmond | |
| Engineering | Assembler - Light Industrial | Iowa - Shenandoah | |
| Engineering | Process Planner | Kansas - Salina | |
| Engineering | Junior Mfg Eng - Project Analyst (ME I or ME II) | Kansas - Wichita | |
| Engineering | Product Engineer - Junior Level (ME I) | Kansas - Wichita | |
| Engineering | Senior Manufacturing Engineer (Tool Design) | Kansas - Wichita | |
| Engineering | Production Engineer -Junior Level (ME II) | Kansas - Wichita | |
| Engineering | Supply Chain Associate - Junior - 1st shift | Kansas - Wichita | |
| Engineering | Admin Specialist | Kansas - Wichita | |
| Engineering | Technical Support Specialist | Kansas - Wichita | |
| Engineering | Mechanical Systems Engineer - Senior Level | Kansas - Wichita | |
| Engineering | Senior Mechanical Engineer II |
Kansas - Wichita | |
| Engineering | Senior Mechanical Engineer I | Kansas - Wichita | |
| Engineering | Project Manager, Supply Chain Management | Kansas - Wichita | |
| Engineering | Contracts Negotiator | Kansas - Wichita | |
| Engineering | Electrical Engineer - Intermediate Level | Kansas - Wichita | |
| Engineering | Powerplant Engineer - Senior Level | Kansas - Wichita | |
| Engineering | Supply Chain Analyst | Kansas - Wichita | |
| Engineering | Quality Assurance Engineer | Kansas - Wichita | |
| Engineering | Quality Assurance Engineer Auditor | Kansas - Wichita | |
| Engineering | system Safety DER | Kansas - Wichita | |
| Engineering | Manufaturing Engineer - Tool Designer | Kansas - Wichita | |
| Engineering | Supply Chain Specialist - Intermediate | Kansas - Wichita | |
| Engineering | Process Planner | Kansas - Wichita | |
| Engineering | Manufacturing Engineer - Senior ME II | Kansas - Wichita | |
| Engineering | Manufacturing Engineer - Interm ME I | Kansas - Wichita | |
| Engineering | Manufacturing Engineer - Junior ME II | Kansas - Wichita | |
| Engineering | Flight Test Engineer | Kentucky - Lexington | |
| Engineering | Project Manager | Louisiana - Slidell | |
| Engineering | Principal Mechanical | Louisiana - Slidell | |
| Engineering | Senior Mechanical Engineer | Louisiana - Slidell | |
| Engineering | Senior Repair/Overhaul Technician | Louisiana - Slidell | |
| Engineering | Analyst | Michigan - Galesburg | |
| Engineering | Administrative Assistant 1 | Michigan - Galesburg | |
| Engineering | Mechanical Engineer | Michigan - Galesburg | |
| Engineering | Analyst | Michigan - Jackson | |
| Engineering | Mechanical Engineer | Michigan - Southfield | |
| Engineering | Electronic Technican | Michigan - Southfield | |
| Engineering | Machine Operator - Light Industrial | Nebraska - Kearney | |
| Engineering | Product Marketing Manager | New York - Buffalo | DIRECT HIRE |
| Engineering | Electrical Assembler A | New York - East Aurora | 1 year |
| Engineering | Senior Motor Design Engineer | New York - East Aurora | DIRECT |
| Engineering | Inspector | New York - East Aurora | 6 months |
| Engineering | Scheduler | New York - East Aurora | 1 year |
| Engineering | Master Scheduler | New York - East Aurora | 1 year |
| Engineering | Assembler / Tester | New York - East Aurora | 6 months |
| Engineering | Senior Electronic Technician | New York - East Aurora | 7 months |
| Engineering | Senior Electrical Engineer | New York - East Aurora | DIRECT HIRE |
| Engineering | Engineering Lab Technician | New York - East Aurora | 1 year |
| Engineering | Master Finisher | New York - East Aurora | 7 months |
| Engineering | Assembler Technician | New York - East Aurora | 1 year |
| Engineering | Electronic Inspector | New York - East Aurora | 8 months |
| Engineering | Switchboard Operator | New York - East Aurora | 8 months |
| Engineering | CNC Swiss Machinist | New York - East Aurora | 6 months |
| Engineering | Industrial Worker - Light Industrial | New York - Horsehead | 6 months |
| Engineering | Office Clerk | North Carolina - Charlotte | |
| Engineering | Human Resources Assistant | North Carolina - Fayetteville | |
| Engineering | Technician | North Carolina - Kings Mountain | |
| Engineering | Assembler - Light Industrial | North Carolina - Raleigh | 3 months |
| Engineering | Administrative Assistant 1 | North Carolina - Raleigh | |
| Engineering | Technician | North Carolina - Raleigh | |
| Engineering | Electrical Engineer | North Carolina - Raleigh | |
| Engineering | Project Coordinator | Ohio - Euclid | |
| Engineering | Cost Estimator - Sheet Metal Estimation | Oregon - Central Point | |
| Engineering | Cost Estimator - Machine Shop Parts Estimation | Oregon - Central Point | |
| Engineering | Material Planner | Pennsylvania - Beaver | |
| Engineering | Logistics Management Analyst | Pennsylvania - Johnstown | |
| Engineeering | Buyer | Pennsylvania - Moon Township | |
| Engineering | Data Entry Clerk I | Pennsylvania - Pittsburgh | |
| Engineering | Marketing Communications Specialist | Pennsylvania - Pittsburgh | |
| Engineering | Supervisor - Production | Rhode Island - Warwick | |
| Engineering | Administrative Assistant 3 | Rhode Island - Warwick | |
| Engineering | Production Associate - Material Handler | South Carolina - Sumter | |
| Engineering | Production Associate - Fabrication | South Carolina - Sumter | |
| Engineering | Administrative Assistant 3 | South Carolina - Sumter | |
| Engineering | Assembler - Light Industrial | Tennessee - Cleveland | |
| Engineering | Material Handler - Forklift Operator | Tennessee - Cleveland | |
| Engineering | Shipping and Receiving Clerk | Tennessee - Gainesboro | 3 months |
| Engineering | Machine Operator - Heavy Industrial | Tennessee - Newbern | |
| Engineering | Procurement Transition Manager | Texas - Amarillo | |
| Engineering | Legal Secretary 3 | Texas - Dallas | |
| Engineering | Facilities Engineer | Texas - Fort Worth | 2 years |
| Engineering | Subcontract Administrator | Texas - Fort Worth | |
| Engineering | Electronics Engineer | Texas - Fort Worth | 6 months |
| Engineering | SAP Consultant | Texas - Greenville | |
| Engineering | Benefits Administrator | Texas - Greenville | |
| Engineering | Systems Integration Designer | Texas - Hurst | 1 year |
| Engineering | Harmonized Tariff Schedule Classification Specialist | Texas - Hurst | 18 months |
| Engineering | Aero Log Engineer | Texas - Hurst | 1 year |
| Engineering | Web Communication Specialist | Texas - Hurst | 1 year |
| Engineering | Subcontract Specialist | Texas - Hurst | 1 year |
| Engineering | Aircraft Mechanical Installers | Texas - Waco | 6 months |
| Engineering | Instrumentation & Test Engineer | Texas - Waco | |
| Engineering | Fatigue & Damage Tolerance Analyst | Texas - Waco | |
| Engineering | Electrical / Mechanical Assembler II | Utah - Salt Lake City | 10 months |
| Engineering | Electrical / Mechanical Assembler | Utah - Salt Lake City | 1 year |
| Engineering | Material Administrator | Wisconsin - Watertown | |
| Engineering | Assembler - Electronic (Hand) | Wisconsin - Watertown | |
| Engineering | Data Entry Clerk 1 | Wisconsin - Watertown |
To be considered for one (or more) of the above opportunities call or email
a Global Recruiter today, or you may submit your resume to GCPJobs@teamglobal.com.
Your Global Recruiters are:
| Recruiter | Phone | |
| Valerie White - Manager | 1-877-892-2103 | vwhite@teamglobal.com |
| Alex McCullough | (817) 847-6673 ext. 2178 | |
| Rick Davis | 1-877-684-2170 | rdavis@teamglobal.com |
| Mark Milligan | 1-877-359-2160 |
Global Contract Professionals, Inc.
P.O. Box 161127
Fort Worth, Texas 76161-1127
1-800-942-2376
fax: (817) 232-3905
e-mail: info@teamglobal.com
Job Postings by the Global Family of Staffing Agencies - A Full Service Employment Agency in Fort Worth, Texas. Global - Not Your Average Employment Agencies.
Global - "Putting Great People in Great Jobs."