Aerospace Maintenance Positions
Global Technical Services
The leader in providing the aerospace industry with well-trained, experienced maintenance and modification professionals.

To be considered for one (or more) of these opportunities, submit your resume to GTSJobs@teamglobal.com, or contact a Global Recruiter at one of the numbers below.

Current Aerospace Maintenance & Modification Opportunities
Below is a list of current Aerospace Maintenance and Modification openings:

Aerospace Position Title Location Additional Information
Mechanics A&P Mechanics - Intermediate Level Atlanta, GA

Repair and maintain components used for aircraft airframe and powerplant. They inspect aircraft engines, landing gear, instruments, pressurized sections, accessories – brakes, valves, pumps, and air-conditioning systems. Maintain records related to the maintenance performed on the aircraft.

Mechanics conduct inspections following a schedule based on the number of hours the aircraft has flown, calendar days since the last inspection, cycles of operation, or a combination of these factors. They repair or replace worn or defective parts.

Mechanics may also repair sheet metal or composite surfaces.

Some mechanics work on one or many different types of aircraft, such as jets, propeller-driven airplanes.They interpret technical manuals, drawings and blue prints.

Must have a FAA Airframe and Power Plant License and two to three years of work related experience.

Mechanics A&P Mechanics Brunswick, GA Aircraft Technician II with some Sheet Metal Experience.
Mechanics A&P Mechanics Fort Lauderdale, FL

A&P Required; Minimum of 3+ years Rotary Wing Experience on Bell 412, 412 430 series.  EC130.

Factory School training is required.

Mechanics A&P Mechanics Indianapolis, IN

Must have a FAA Airframe and Power Plant License and two to three years of work related experience.

Repair and maintain components used for aircraft airframe and powerplant. They inspect aircraft engines, landing gear, instruments, pressurized sections, accessories – brakes, valves, pumps, and air-conditioning systems. Maintain records related to the maintenance performed on the aircraft. Mechanics conduct inspections following a schedule based on the number of hours the aircraft has flown, calendar days since the last inspection, cycles of operation, or a combination of these factors. They repair or replace worn or defective parts. Mechanics may also repair sheet metal or composite surfaces. Mechanics rely on the pilots description of a problem to find and fix faulty equipment. Some mechanics work on one or many different types of aircraft, such as jets, propeller-driven airplanes.They interpret technical manuals, drawings and blue prints.

Mechanics A&P Mechanic Mesa, AZ

5 years min on product line (Hawker 987 Line) and 10 years min total experience.

Repair and maintain components used for aircraft airframe and powerplant. They inspect aircraft engines, landing gear, instruments, pressurized sections, accessories – brakes, valves, pumps, and air-conditioning systems. Maintain records related to the maintenance performed on the aircraft. Mechanics conduct inspections following a schedule based on the number of hours the aircraft has flown, calendar days since the last inspection, cycles of operation, or a combination of these factors. They repair or replace worn or defective parts. Mechanics may also repair sheet metal or composite surfaces. Mechanics rely on the pilots description of a problem to find and fix faulty equipment. Some mechanics work on one or many different types of aircraft, such as jets, propeller-driven airplanes.They interpret technical manuals, drawings and blue prints.

Must have a FAA Airframe and Power Plant License and four years of work related experience.

Mechanics A&P Mechanic Mesa, AZ

Recent experience on aircraft and 5 – 10 years of mechanic experience. 5 years min on Hawker Beech product line

Highly experienced on Hawker 700XP and 800XP, Beechjets, King Airs

Repair and maintain components used for aircraft airframe and powerplant. They inspect aircraft engines, landing gear, instruments, pressurized sections, accessories – brakes, valves, pumps, and air-conditioning systems. Maintain records related to the maintenance performed on the aircraft. Mechanics conduct inspections following a schedule based on the number of hours the aircraft has flown, calendar days since the last inspection, cycles of operation, or a combination of these factors. They repair or replace worn or defective parts. Mechanics may also repair sheet metal or composite surfaces. Mechanics rely on the pilots description of a problem to find and fix faulty equipment. Some mechanics work on one or many different types of aircraft, such as jets, propeller-driven airplanes.They interpret technical manuals, drawings and blue prints.

Must have a FAA Airframe and Power Plant License and four years of work related experience.

Mechanics A&P Mechanic Mesa, AZ A&P Mechanic-Sr Hawker or King Air - Highly experienced on Hawker 700XP and 800XP, Beechjets, King Airs
Mechanics A&P Mechanic San Antonio, TX Heavy Commercial Jet experience required (3-5 yrs minimum)
Mechanics A&P Mechanic Savannah, GA Senior Aircraft Technician
Mechanics A&P Mechanic Wichita, KS A&P Mechanic-Interm 2nd Shift
Mechanics Avionics Indianapolis, IN Heavy experience working with Learjet & Challenger, must have line maintenance working experience to be considered.
Mechanics Avionics San Antonio, TX

Repair and maintain components used for aircraft navigation and radio communications, weather radar systems, and other instruments and computers that control flight, engine and other primary functions. 

May accompany flight crew to perform in-flight adjustments and to determine and record required post repair work.  May sign overhaul documents for equipment replaced or repaired.

May operate ground station for air-to-station check of radar or other equipment.

Four to six years experience required.

Mechanics Avionics San Antonio, TX Heavy Commercial Jet Experience required (3-5 yrs minimum)
Mechanics Avionics Savannah, GA

Associate degree in electronics engineering technology, a related curriculum or an equivalent combination of education and experience.

Two yrs in the specific technical discipline or 4 yrs broad experience in several technical disciplines with Associates degree, or 4 yrs in the specific technical discipline or 6 yrs broad experience in several technical disciplines.

Need to have A&P License and/or FCC License.

Experience with LAN & WAN.

Mechanics Avionics Savannah, GA

Two years of accredited schooling in aviation electronics or two years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.

High School graduate or GED.

Mechanics Avionics Tampa, FL

Avionics Supervisor - 5+ years experience on Business Jets, NOT Military or Airline Experience.


Repair and maintain components used for aircraft navigation and radio communications, weather radar systems, and other instruments and computers that control flight, engine and other primary functions.  Because of the increasing use of technology, more time is spent repairing electronic systems, such as computerized controls.  May accompany flight crew to perform in-flight adjustments and to determine and record required post repair work.  May sign overhaul documents for equipment replaced or repaired. May operate ground station for air-to-station check of radar or other equipment.

Four to six years experience required.

Mechanics Cabinets Savannah, GA Cabinet Finisher Sr. - 4 yrs of experience in wood finishing processes. Exp in aerospace industry preferred. Advanced knowledge of cabinet finishing processes and products.
Mechanics Inspectors San Antonio, TX 80 hour FAM couse on A300-600
Mechanics Inspector Tampa, FL

Looking for Inspector with Avionics knowledge

Inspection of aircraft engines, landing gear, instruments, pressurized sections, accessories – brakes, valves, pumps, and air-conditioning systems.

Maintain records related to the maintenance performed on the aircraft. Inspectors conduct inspections following a schedule based on the number of hours the aircraft has flown, calendar days since the last inspection, cycles of operation, or a combination of these factors. They repair or replace worn or defective parts.

Inspectors inspect one or many different types of aircraft, such as jets, propeller-driven airplanes.

Mechanics Interiors San Antonio, TX Heavy Commercial Jet Experience required (3-5 yrs minimum)
Mechanics Interiors Wichita, KS Essential Duties and Responsibilities:

• Plans and schedules interior work.
• Removes, refurbishes and installs aircraft interiors per customer specifications.
• Utilizes schematic drawings and blueprints.
• Uses all tools and equipment required to perform the job.
• Performs all carpentry work for aircraft interiors per customer specifications.
• Presents a clean and neat work area to our customers.
• Performs some types of aircraft maintenance.
• Performs other duties as may be required.

Knowledge Skills and Abilities:

• Skills in sewing, aircraft seat design, aircraft interior design, and leather work.
• Skills in wood working, Formica, fiberglass, veneers, composites and laminates.
• Knowledge of FAA requirements for aircraft interiors.
• Knowledge of computers and their operations.
• Knowledge of the English language.
• General knowledge of the combined federal regulations.
• Ability to perform basic communications.
• Ability to follow verbal and written instructions.
• Ability to read and understand blue prints.
• Ability to operate a motorized vehicle.
Mechanics Painters San Antonio, TX

Corp A/C experience required. At least 3 yrs experience.

This job requires the preparation of surfaces for painting with processes such as sanding, brushing, and applying cleaning solutions; spray painting of primer and apply sound deadening material per specifications. Assist higher grade painters as required. Apply various kinds of primer on any required surface, accourding to specifications. Spray Painter and color finish coats on detail parts and sub-assemblies. Dismantle, clean, assemble, and adjust spray guns and other equipment used in work. Perform necessary brush touch-ups work. Mix paints, materials, and all other aircraft finishes.

Requires a HS Diploma/GED

Mechanics Sheetmetal Houston, TX` Minimum of 5 yrs experience working structures/sheet metal REQUIRED.
Mechanics Sheetmetal San Antonio, TX Heavy Commercial Jet experience required (3-5 yrs minimum)
Mechanics Miscellaneous Morristown, NJ Simulator Technican III
Mechanics Miscellaneous Hawthorne, CA

Senior Level Jig & Fixture Builder

The candidate is required to have a High School Diploma or accredited GED Equivalent and at least 5 years prior tool Jig Building experience is preferred. Previous Laser Tracker experience preferred.
*The candidate will need to provide their own tools.


To be considered for one (or more) of the above opportunities call or email a Global Recruiter today, or you may submit your resume to GTSJobs@teamglobal.com.

Your Global Recruiters are:

Recruiter Phone E-Mail
Rick Davis - Manager 1-877-684-2170 rdavis@teamglobal.com
Danny Sills 1-877-744-2124 dsills@teamglobal.com
Walter Garcia - Habla Español 1-877-882-2125

wgarcia@teamglobal.com

Global Technical Services, Inc.
P.O. Box 161127
Fort Worth, Texas 76161-1127
1-800-942-2376
fax: (817) 232-3905
e-mail: info@teamglobal.com

Job Postings by the Global Family of Staffing Agencies - A Full Service Employment Agency in Fort Worth, Texas. Global - Not Your Average Employment Agencies.
Global - "Putting Great People in Great Jobs."